Removing a deep well submersible pump can seem like a daunting task, but with the right knowledge and tools, it becomes manageable, even for those with limited experience in well maintenance. This guide offers a step-by-step approach based on proven expertise and industry practices, designed to enhance your understanding and ability to tackle this project safely and efficiently.

Safety First Before starting, always prioritize safety. Ensure that the power supply to the pump is disconnected. Use insulated tools and wear appropriate protective gear such as gloves and safety goggles. If you're not confident about any step, it's crucial to consult or hire a professional. Understanding Your Well System Familiarize yourself with the specific layout and components of your well system. Typically, a submersible pump is positioned below the water level, connected to the surface by a pipe and power cord. Knowing the depth and type of your well, as well as the pump specifications, is essential.

Assembling the Necessary Tools Gather essential tools, which may include a pipe wrench, a pipe vise, a hoist or a crane for heavy pumps, and a sectional or tripod well puller if necessary. Ensure you have a sturdy and reliable setup to lift the pump, especially if it is deep or particularly heavy. Locating the Wellhead Identify and access the wellhead, which may be above ground or housed in a well pit. Remove any coverings or caps gently to avoid damage. Examine the wellhead to assess its condition and confirm the setup for pump removal. Removing the Seal or Cap Carefully dismantle the well seal or cap to access the well cavity. Some systems may have a pitless adapter, especially in colder climates, which you will need to disconnect to pull the pump. Disconnecting the Electrical Supply Detach the electrical leads connecting the pump to the power source. This typically involves unscrewing wire nuts or other securing components. Take pictures or label wires to ensure correct reconnection later. Lifting the Pump Attach a lifting device to the safety cable or the well pipe. Use a hoisting system or a tripod puller designed for this task. Begin raising the pump slowly, ensuring that all connections are free of obstructions and move smoothly.how to pull a deep well submersible pump
Handling the Pump and Pipe As you lift, ensure the pipe or drop pipe does not bend or twist severely. If dealing with a flexible pipe, like polyethylene, it must be carefully coiled. For metal pipes, each segment should be handled to avoid kinks or damage. Maintaining Balance and Control Balance is key to avoiding accidents or damage. Use a guiding hand or helper to stabilize the suspended pipe and pump assembly, particularly if the well is deep. Securing the Removed Pump Once the pump is completely out of the well, carefully lay it down on a soft surface to avoid scratches or other damage. Inspect the pump for any visible wear or damage, which may explain the need for removal in the first place. Assessing the Next Steps Depending on your situation, you might need to replace the pump, repair it, or clean it before reinsertion. Always cross-reference the pump model with manufacturer guidelines to ensure any repairs or replacements meet the necessary specifications. Reinstalling or Replacing When reinstalling, reverse the process, ensuring all components are clean and secure. Test the setup above ground if possible, to confirm proper function before reinserting it into the well. Consultation and Professional Insight While this guide provides a structured approach, integrating the expertise of a professional well technician is always beneficial. They can offer tailored advice, ensuring your specific system requirements are met. By adhering to these steps and maintaining a focus on safety and precision, you can effectively manage the task of pulling a deep well submersible pump. Trustworthy execution of the process not only enhances the pump’s longevity but also safeguards your water supply, maintaining optimal performance of your well system.